Anmelden

Diese Seite unterstützt Internet Explorer nicht mehr.

Capanni, Felix, Prof. Dr.

Felix Capanni

Professor Dr.

Prodekan der Fakultät T Leitung des Praktikantenamts Medizintechnik Leiter des Labors Biomechatronik Leiter der Forschungsgruppe Biomechatronik Leiter des Steinbeis Instituts für Implantatentwicklung, Testung und Zulassung

Forschung

Implantattechnik (Kooperationspartner Prof. Dr. Marc-Eric Halatsch, Universitätsklinikum Ulm)

Orthetik und Prothetik (Kooperationspartner Häussler Technische Orthopädietechnik GmbH, Ulm)

  • Herstellung 3D-gedruckter Hilfsmittel
  • Carbon-Vorfußprothese für die Wiedereingliederung in den Alltagssport
  • Netzwerk Orthopädietechnik

Mechanische Testung (Kooperationspartner Fa. ENDOLAB GmbH, Rosenheim)

  • Entwicklung eines Verfahrens für die mechanische Prüfung und numerishe Simulation von Osteosynthese-Systemen
Link zu ResearchGateWebsite der Forschungsgruppe Biomechtronik

Lehre

Konstruktionslehre & Angewandte Konstruktionslehre

Produktentwicklung in der Medizintechnik

Regulatory Affairs

Grundlagen der Biomechanik


Sprechstunde: Bitte vereinbaren Sie diese per E-Mail

Publikationen

Peer-Reviewed Publikationen

Capanni F., Jürgens C.

Winkelstabile Osteosyntheseimplantate - Intraoperativ montierbares, telemetrisches Lastmesssystem

Trauma Berufskh, 9:98-102, 2007

 

Heizmann V., Capanni F., Engleder T., Appelt A

Development of an Extraosseous Nitinol Implant for the Hallux Valgus Treatment: Primilary Mechanical Investigations, Design and Numerical Simulation

Biomed Tech 2012, 57, Suppl. 1

 

Dürr M., Krais C., Peschmann C., Capanni F., Engleder T

Development of a Patient-Specific Carbon Prothesis to Support Sporting Activities

Biomed Tech 2012, 57, Suppl. 1

 

Hepp, D.; Kirsch, F.; Capanni, F.

Smartphone supported upper limb prosthesis

Current Directions in Biomedical Engineering - ISSN 2364-5504. - DOI: 10.1515/cdbme-2015-0116

 

S. Maile, S. Kobel, M. Munz, T. Engleder, J. M. Steinacker, F. Capanni

3D-based visual physical activity assessment of children

Current Directions in Biomedical Engineering, DOI: https://doi.org/10.1515/cdbme-2015-0111

 

Capanni, F.; Hansen, K.; Fitzpatrick, D.; Madey, S.; Bottlang, M.

Elastically suspending the screw holes of a locked osteosynthesis plate can dampen impact loads 

Journal of Applied Biomechanics, Vol. 31/3, 2015, S. 164-169; DOI: 10.1123/jab.2014-0193

 

Hendrik Schorler, Felix Capanni, Muneer Gaashan, Robert Wendlandt, Christian Jürgens and Arndt-Peter Schulz

Bone plates for osteosynthesis - A systematic review of test methods and parameters for biomechanical testing

Biomed Tech (Berl). 2017 May 24; 62(3):235-243. doi: 10.1515/bmt-2015-0219.

 

Hendrik Schorler, Robert Wendlandt, Christian Jürgens, Arndt-Peter Schulz, Christian Kaddick and Felix Capanni

Bone plate-screw constructs for osteosynthesis - recommendations for standardized mechanical torsion and bending testing

Biomed Tech (Berl). 2018 Nov 27; 63(6):719-727. doi: 10.1515/bmt-2017-0126.

 

Fabian Mager, Jim D. Richards, Malika Hennies, Eugen Dötzel, Ambreen Chohan, Alex Mandla Mbuli, Felix Capanni

Determination of ankle and metatarsophalangeal stiffness during walking and jogging

J Appl Biomech. 2018 Oct 18:1-6. doi: 10.1123/jab.2017-0265

 

Richard Kast, Nicolas Skuli, Iacopo Sardi, Felix Capanni, Martin Heßling, Guido Frosina, Anton Kast, Georg Karpel-Massler, Mar-Eric Halatsch

Augmentation of 5-Aminoevulinic acid treatment of glioblastoma by adding ciprofloxacin, deferiprone, 5-fluorouracil and febuxostat: The CAALA regimen

Brain Sci. 2018, 8(12), 203; https://doi.org/10.3390/brainsci8120203


​Weitere Publikationen

Capanni F, Maguire RP

Robot Tracer Injection

PSI Life Sciences, Annual Report, Annex II, 1996

 

Capanni F

Dynamische Kalibrierung von Pneumotachographen einschließlich Linearitätsprüfung

www.sw-labor.fhulm.de/Diplomarbeitsdatenbank

1997

 

Hans-Werner Bouman, Felix Capanni, Sigmund Polzer, Steffen Berlet

Neuentwicklung eines Distraktors zur präzisen  Reposition und Distraktion intraartikulärer Basis-Frakturen der Finger-Mittelglieder mit und ohne Luxation

ATOSnews, Ausgabe 14, 2009

 

Dötzel, Eugen; Capanni, Felix; Engleder, Thomas; Steinacker, Jürgen

Gait biomechanics of patients with forefoot amputation using a customized carbon fiber prosthesis

Abstracts BMTMedPhys 2017 Annual Meeting of the German Society of Biomedical Engineering

 

Gaashan, Muneer; Engleder, Thomas; Capanni, Felix

Simulation and development of a patient-specific carbon fiber forefoot prosthesis using finite element method

Jahrestagung der Biomedizinischen Technik und Dreiländertagung der Medizinischen Physik, Dresden, 10.-13.9.2017

 

N. Bader, F. Capanni, M-E Halatsch, R.E. Kast, C. Peschmann

A novel treatment approach after glioblastoma resection: microcontroller-based surgical implant with light-emitting diods for postoperative irradiation of glioblastoma cells

Abstracts BMTMedPhys Biomedical Engineering/Biomedizinische Technik. - 2017. - 62(s1). - S. 301–303. - ISSN: 0013-5585. - DOI: https://doi.org.10.1515/bmt-2017-5059

 

F. Capanni, S. Matyssek, M. Gaashan, E. Dötzel

Development of a Customised Forefoot Prosthesis to Enable Reintegration into Recreational Sports

Orthopädie Technik, 05/2018

             

Muneer Gaashan, Thomas Engleder, Eugen Dötzel, Felix Capanni, Jürgen M. Steinacker

Patient specific FEM design of a carbon fiber forefoot prosthesis to support reintegration into daily sports

Abstract P4162, 8th World Congress of Biomechanics, Dublin, 2018

 

Eugen Dötzel, Muneer Gaashan, Steffen Matyssek, Jürgen M. Steinacker, Jim D. Richards, Felix Capanni

Initial results of a clinical study with traumatic forefoot amputees: Comparison of gait parameters wearing a customized carbon and a silicone prosthesis

Abstract O1457, 8th World Congress of Biomechanics, Dublin, 2018

 

Steffen Matyssek, Eugen Dötzel, Muneer Gaashan, Felix Capanni

Digital unterstützter Herstellungsprozess einer individuell angepassten Vorfußprothese aus Carbon-Faserverbund

Medical Device Manufacturing Conference Abstractband, April 2017

 

E. Dötzel, M. Gaashan, F. Mager, D. Sergi, J. M. Steinacker, F. Capanni

Biomechanische Analyse richtungsändernder Bewegungen – Vergleich einer vorfußamputierten Probandin mit einer gesunden Kontrollgruppe

Orthopädie Technik, 04/2019


Poster

Heizmann V., Capanni F., Engleder T., Appelt A

Development of an Extraosseous Nitinol Implant for the Hallux Valgus Treatment: Preliminary Mechanical Investigations, Design and Numerical Simulation

49th DGBMT Annual Conference, Jena, 2012

 

Dürr M., Krais C., Peschmann C., Capanni F., Engleder T

Development of a Patient-Specific Carbon Prothesis to Support Sporting Activities

49th DGBMT Annual Conference, Jena, 2012

 

D. Hepp, J. Kirsch, F. Capanni

Smartphone supported upper limb prosthesis

49th DGBMT Annual Conference, Jena, 2012

 

E. Dötzel, T. Engleder, F. Capanni

Standardisierte Herstellung patientenindividueller Sportprothesen - traumaFit

Innovationsforum Medizintechnik, Medical Mountain, Tuttlingen, 2013

 

D. Hepp, J. Kirsch, T. Engleder, F. Capanni

Myoelektrische Fremdkraftprothese für die obere Extremität – flexHand

Innovationsforum Medizintechnik, Medical Mountain, Tuttlingen, 2013

 

Capanni, F.; Hansen, K.; Fitzpatrick, D.; Madey, S.; Bottlang, M.

Elastically suspending the screw holes of a locked osteosynthesis plate can dampen impact loads 

9. Jahrestagung der Deutschen Gesellschaft für Biomechanik (DGfB), Mai 2015

 

D. Hepp, J. Kirsch, F. Capanni

Development of a smart phone supported upper limb prosthesis with eleven active driven degrees of freedom

ISPO World Congress, Lyon, 2015

 

Eugen Dötzel, Felix Capanni, Thomas Engleder, Jürgen M. Steinacker

Gait biomechanics of patients with forefoot amputation using a customized carbon fiber prosthesis

Jahrestagung der Biomedizinischen Technik und Dreiländertagung der Medizinischen Physik, Dresden, 2017

 

Gaashan M, Engleder T, Steinacker J.M., Dötzel E, Capanni F

Patient specific FEM design of a carbon forefoot prosthesis for physical active patients

OT World, Leipzig, 2018

 

M. Gaashan, T. Engleder, E. Dötzel, J.M. Steinacker, J. Richards, F. Capanni

Patient-specific FEM Design of a Carbon Fiber Forefoot Prosthesis to Support Reintegration into Daily Sports

8th World Congress of Biomechanics, Dublin, 2018

 

Schorler H., Halbauer C., Wendlandt R., Jürgens C., Schulz A.-P., Capanni F.

Recommended mechanical testing of bone plate-screw constructs for regulatory purposes

11. Jahrestagung der Deutschen Gesellschaft für Biomechanik (DGfB), April 2019

 

Halbauer C., Schorler H., Engleder T., Capanni F.

A sensitivity analysis to evaluate the influence of the center span and plate to bone distance on a plate-screw-bone construct for implant testing

11. Jahrestagung der Deutschen Gesellschaft für Biomechanik (DGfB), April 2019

Nominiert für Best Poster Award


Bücher/Buchbeiträge

Stephan Klein, Felix Capanni, Uvo M. Hölscher, Frank Rothe

Entwicklung und Bewirtschaftung von Medizinprodukten

erschienen in: Biomedizinische Technik – Faszination, Einführung, Überblick: Band 1, Ute Morgenstern, Marc Kraft et al., 2014, ISBN 978-3-11-025198-2

 

Max D. Singh und Felix Capanni

Medizintechnik Spin-offs aus der Hochschule Ulm – ein Prozessbeispiel

erschienen in: Entrepreneurship im Gesundheitswesen, Pfannstiel et al., 2018, ISBN 978-3-658-14780-8

 

A. Steffen, J. Stockhardt, F. Capanni, A. Emmendörfer

Medizinprodukte planen, entwickeln, realisieren - Der CE-Routenplaner

TÜV Media GmbH, ISBN 978-3-8249-1100-4

www.tuev-media.de/produkte/91100-medizinprodukte-planen-entwickeln-realisieren.php


Herausgeberschaften

Mitherausgeber des CE-Routenplaner, Verlag TÜV Media, TÜV Rheinland

 

Mitgliedschaften in wissenschaftlichen Fachgesellschaften

Freie Arbeitsgemeinschaft winkelstabile Osteosynthese e.V. (awiso®)

VDE, Fachgesellschaft DGBMT

DGfB, Deutsche Gesellschaft für Biomechanik e.V.

DIN-Normenausschuss Feinmechanik und Optik (NA 027-02-15 AA Endoprothetik und Osteosynthese)

 

Funktionen in wissenschaftlichen Gesellschaften

2. Vorsitzender der Arbeitsgemeinschaft winkelstabile Osteosynthese e.V. (awiso®)

Beirat im Journal Trauma und Berufskrankheit, Springer Verlag

Beirat der Lehrbuchreihe „Biomedizinische Technik", Deutsche Gesellschaft f. Biomedizinische Technik

Juror beim Studentenwettbewerb Medizintechnik, Deutsche Gesellschaft für Biomedizinische Technik

Gründungsmitglied der Forschungsgruppe Biomechatronik an der Technischen Hochschule Ulm (2016)


Kontakt
Prof. Dr. Felix Capanni
Raum: Q221
Albert-Einstein-Allee 53-55
89081 Ulm
Fon: +49 731 96537-371
Mail: Felix.Capanni@thu.de

Quicklinks